Tango Wall up-down light

Description

Tango 1, 2 Wall up-down light

IP65 ∙ CLASS I ∙ CE

tango 1 2 wall up down conventional detail beam

Wall luminaires with a variety of reflectors and lamps with up and downward light distributions. Designed to illuminate the wall surface and for light accents on vertical surfaces. Low copper content die-cast aluminum housing and aluminum frame with integral anti-glare baffles. Stainless steel screws. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral electronic control gear. Anodized high purity aluminum reflector.

For horizontally mounted single lamp configurations a one piece multi directional anodized high purity aluminum reflector is used for up and down light distribution. Two lamp configurations use individual reflectors for up and down light distributions.

 

Series Model No. Lamp Power V Holder Lamp Beam Beam Lumen EEC Weight (H) Height Picture CCG *ECG 
VN N M W VW
TANGO 1 TA-30401 QT18 150 W 220-230 V B15d 20° 2500 lm C 2.5 kg. 196 mm. 1
TA-30402 HIT-CE 35 W G12 54° 3300 lm A+ 4.3 kg. 196 mm. 2
TA-30403 HIT-CE 2×35 W G12 12° 26° 35° 60° 2×3300 lm A+ 7.6 kg. 480 mm. 2
TA-30404 TC-D 2×18 W G24d-2 88° 2×1200 lm A 5.6 kg. 410 mm. 2
TANGO 2 TA-30381 HIT-CE 70 W G12 18° / 59° 6600 lm A+ 6.1 kg. 260 mm.
TA-30382 HIT-CE 150 W G12 18° / 59° 14000 lm A+ 6.7 kg. 260 mm.
TA-30383 HIT-CE 2×70 W G12 12° 26° 35° 60° 2×6600 lm A+ 10.3 kg. 513 mm.
TA-30384 HIT-CE 2×70 W E27 67° 2×4900 lm A+ 10.7 kg. 565 mm.
TA-30386 HSE 2×70 W E27 79° 2×5600 lm A+ 10.7 kg. 565 mm.
TA-30387 TC-D 2×26 W G24d-3 79° 2×1800 lm A 7.2 kg. 465 mm.
TA-30388-26 TC-TEL 2×26 W Gx24q-3 64° 2×1800 lm A 6.4 kg. 465 mm.
TA-30388-32 TC-TEL 2×32 W Gx24q-3 74° 2×2400 lm A 6.4 kg. 465 mm.
TA-30389 TC-TEL 2×42 W Gx24q-4 79° 2×3200 lm A 6.5 kg. 465 mm.

Tango 7 , 8 Wall up-down light

IP65 ∙ CLASS I ∙ CE

tango 7 8 wall up down conventional detail beam

Wall luminaires with a variety of reflectors and lamps with up and downward light distributions using a single lamp mounted horizontally. Designed to illuminate the wall surface and for light accents on vertical surfaces. The upward light component consists of a sharp beam of light that is controlled by a glass prism this can be used to highlight architectural features on buildings. The light beams can be red, blue, yellow green, and white.

Low copper content die-cast aluminum housing and aluminum frame with integral anti-glare baffles. Stainless steel screws. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral electronic control gear. Anodized high purity aluminum reflector.

 

Series Model No. Lamp Power Holder Beam Lumen EEC Weight
CCG *ECG
TANGO 7 TA-30761 HIT-CE 35 W G12 3.5° / 32° 3300 lm A+ 4.9 kg.
TANGO 8 TA-30771 HIT-CE 70 W G12 3.5° / 34° 6600 lm A+ 6.7 kg.
TA-30772 HIT-CE 150 W G12 4° / 36° 14000 lm A+ 7.3 kg.

Tango 7 , 8 Wall up-down light

IP65 ∙ CLASS I ∙ CE

tango 7 8 wall up down conventional detail beam

Wall luminaires with a variety of reflectors and lamps with up and downward light distributions using a single lamp mounted horizontally. Designed to illuminate the wall surface and for light accents on vertical surfaces. The upward light component consists of a sharp beam of light that is controlled by a glass prism this can be used to highlight architectural features on buildings. The light beams can be red, blue, yellow green, and white.

Low copper content die-cast aluminum housing and aluminum frame with integral anti-glare baffles. Stainless steel screws. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral electronic control gear. Anodized high purity aluminum reflector.

 

Series Model No. Lamp Power Holder Beam Lumen EEC Weight
CCG *ECG
TANGO 7 TA-30761 HIT-CE 35 W G12 3.5° / 32° 3300 lm A+ 4.9 kg.
TANGO 8 TA-30771 HIT-CE 70 W G12 3.5° / 34° 6600 lm A+ 6.7 kg.
TA-30772 HIT-CE 150 W G12 4° / 36° 14000 lm A+ 7.3 kg.

Tango 9 , 10 Wall up-down light

IP65 ∙ CLASS I ∙ CE

tango 7 8 wall up down conventional detail beam

Wall luminaires with upward and downward light distributions. The upward light illuminate very sharp light distribution by a glass lens. Ideal is designed to illuminate the wall and surface in front of wall and for light accents on vertical surfaces.

Die-cast aluminium housing with high corrosion resistance. Aluminium bottom frame with integral anti-glare baffle. Stainless steel screws. Durable silicone rubber gasket and clear toughened glass. Single cable entry with electrical wiring fast connectors. Powder paintwith high corrosion resistance with chemical chromatised protection. Integral control gear. Anodized high purity aluminium reflector design for two directionals up and down light distribution use one lamp.

 

Series Model No. Lamp Power Holder Beam Lumen EEC Weight
CCG *ECG
TANGO 9 TA-30861 HIT-CE 35 W G12 3.5° / 32° 3300 lm A+ 5.4 kg.
TANGO 10 TA-30871 HIT-CE 70 W G12 3.5° / 34° 6600 lm A+ 7.4 kg.
TA-30872 HIT-CE 150 W G12 4° / 36° 14000 lm A+ 8.0 kg.

Tango 11 , 12 wall up-down light

IP65 ∙ CLASS I ∙ CE

tango 1 2 wall up down conventional detail beam

Wall luminaires with a variety of reflectors and lamps with up and downward light distributions. Designed to illuminate the wall surface and for light accents on vertical surfaces.

Low copper content die-cast aluminum housing and aluminum frame with integral anti-glare baffles. Stainless steel screws. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral electronic control gear. Anodized high purity aluminum reflector.

For horizontally mounted single lamp configurations a one piece multi directional anodized high purity aluminum reflector is used for up and down light distribution. Two lamp configurations use individual reflectors for up and down light distributions.

 

Series Model No. Lamp Power Holder Lamp Beam Beam Lumen EEC Weight (H) Height CCG *ECG
VN N M W VW
TANGO 11 TA-30721 TC-D 2×18 W G24d-2 88° 2×1200 lm A 6.1 kg. 412 mm.
TA-30722 HIT-CE 35 W G12 54° 3300 lm A+ 4.8 kg. 198 mm.
TA-30723 HIT-CE 2×35 W G12 12° 26° 35° 60° 2×3300 lm A+ 8.1 kg. 482 mm.
TANGO 12 TA-30731 TC-D 2×26 W G24d-3 79° 2×1800 lm A 8.5 kg. 467 mm.
TA-30732-26 TC-TEL 2×26 W Gx24q-3 64° 2×1800 lm A 7.7 kg. 467 mm.
TA-30732-32 TC-TEL 2×32 W Gx24q-3 74° 2×2400 lm A 7.7 kg. 467 mm.
TA-30733 TC-TEL 2×42 W Gx24q-4 79° 2×3200 lm A 7.8 kg. 467 mm.
TA-30735 HSE 2×70 W E27 79° 2×5600 lm A+ 12.1 kg. 567 mm.
TA-30736 HIE 2×70 W E27 67° 2×4900 lm A+ 12.1 kg. 567 mm.
TA-30737 HIT-CE 70 W G12 18°/ 59° 6600 lm A+ 7.1 kg. 262 mm.
TA-30738 HIT-CE 150 W G12 18°/ 59° 14000 lm A+ 7.7 kg. 262 mm.
TA-30739 HIT-CE 2×70 W G12 12° 26° 35° 60° 2×6600 lm A+ 11.6 kg. 513 mm.
TOP